|
Click here to launch data sheet
It was never easier to waterproof a pond with this new, 400% elastic,single component, high performance liquid applied membrane which is also drinking water approved to EEC Directive 98/83/CE. It can be applied to different surfaces, such as concrete, mortar, ceramics, fiberglass reinforced polyester etc.This totally seamless membrane has to be applied in two layers of contrasting colour to ensure optimum coverage.Application: Impermax Aqua, available in either black or grey, must be applied in quantities up to 2kg/m2 resulting in a membrane thickness of 1.6mm
It can be easily applied on different kinds of surfaces used in hydraulic infrastructures such as concrete, mortar, ceramics, fibreglass reinforced polyester, etc).
ADVANTAGES:
- Economic and easy to apply, it delivers a jointless continuous membrane which totally adapts to the surfaces to be protected.
- Extreme mechanical and chemical properties.
- Certified according to EEC Directive 98/83/CE, so it can be in direct contact with drinking water for human consumption.
- This membrane can easily be applied in areas which are difficult to access with other systems.
- It is easy to obtain uniform thicknesses combining the product with GEOMAX and our THIXOTROPY AGENT, even in extremely steep or even vertical areas (see data sheet for these materials).
- IMPERMAX AQUA can be applied even in cases of low temperatures and high relative humidities, obtaining very short cure times in combination with our PUR CAT additive (see data sheet).
- Product can be exposed to pedestrian traffic without any need for a extra protection.
- Product does not require any blends or special primers (it is a one component product).
|
